I am trying to connect minicom to a serial device that is connected via a USB to Serial adapter. This is a PL2303 and from everything I've read no additional drivers are required. The device is recognised as a PL2303. I'm a beginner at minicom. Is this the correct command to execute?

Or do I need to configure something? $ sudo minicom --device /dev/ttyUSB0 minicom: cannot open /dev/ttyUSB0: No such file or directory $ sudo lsusb -v Bus 002 Device 006: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port Device Descriptor: bLength 18 bDescriptorType 1 $ tail /var/log/syslog #then removed and attached the device. Mar 13 23:31:49 ubuntu kernel: [805] usb 2-1: pl2303 converter now attached to ttyUSB0 Mar 13 23:34:44 ubuntu kernel: [829] usb 2-1: USB disconnect, address 7 Mar 13 23:34:44 ubuntu kernel: [821] pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0 Mar 13 23:34:44 ubuntu kernel: [874] pl2303 2-1:1.0: device disconnected Mar 13 23:34:52 ubuntu kernel: [856] usb 2-1: new full speed USB device using uhci_hcd and address 8 Mar 13 23:34:52 ubuntu kernel: [845] pl2303 2-1:1.0: pl2303 converter detected Mar 13 23:34:52 ubuntu kernel: [809] usb 2-1: pl2303 converter now attached to ttyUSB0. I get get the same minicom error, 'cannot open /dev/ttyUSB0: No such file or directory' Three notes: • I get the error when the device attached to the serial port end of my Prolific Technology PL2303 USB/Serial adapter is turned off.

After turning on the device (an embedded controller running Linux) minicom connected fine. • I have to run as super user (i.e sudo minicom) • Sometimes I have to unplug and plug back in the USB/Serial adapter to get minicom to connect to it. I am running Ubuntu 10.04 LTS under VMWare (runing on Windows 7). In this situation, make sure the device is attached to VM operating system by right clicking on the USB/Serial usb icon in the lower right of the VMWare window and select Connect (Disconnet from Host) Remember to press Ctrl-A to get minicoms prompt, type X to exit the program. Just exiting the terminal session running minicom, will leave the process running. I just got my GUC232A cable with molded in pl2302 converter chip. In additon to adding myself and br to group dialout, I found in the README.Debian file in /usr/share/doc/bottlerocket.

This helpful tip: This package uses debconf to configure the /dev/firecracker symlink, should you need to change the symlink in the future run this command: dpkg-reconfigure -pmedium bottlerocket That will then prompt you for your new serial port and modify the symlink. Download Insidious Chapter 3 Full Movie In Hindi Dubbed. This is required for proper use of bottlerocket. I did that and voila!

Bottlerocket is able to communicate with my X-10 devices. Xbox 360 Wireless Adapter Driver Windows 7.

Oct 13, 2011. I find screen the most useful program for serial communication since I use it for other things anyway. It's usually just screen /dev/ttyS0. If you want to communicate interactively with another computer over the serial port then you will need terminal emulation software. This does quite a lot - it sets up the port,. Jan 24, 2012. Moserial is a clean, friendly gtk-based serial terminal for the gnome desktop. It is written. For those migrating from Windows, moserial replaces the handy Hyperlog for Windows (a non-free serial file capture utility), Hyperterminal (the default simple serial app), and Bray Terminal (a hacker's serial terminal).